Please help choosing me a subwoofer!!? - what amp need for my 500 watt kenwood speakers
I have a Kenwood 8103D mono amplifier, but still ties in the 2-channel amplifier does! and 1000Watt peak is 2 ohms and 500 watts RMS into 4 ohms, which supplies deliverd and 300 watts RMS amplifier and now I have a 502Z I assume connected Sony Xplod 125W RMS (250W peak) amplifier and speaker JBL 250-watt Kenwood It is the Sony Xplod 12 "sub 800W, which I think is connected, 200 watts RMS into 4 ohms. and I would like to add a subwoofer, and I like the bass tube JBL CS-1205T, which is another 4 Ohms 275 Watt RMS and 1100 peak, but I'm not sure if my amp is good enough to feed up to 2 subs at 4 ohms 200 + 275 = 475, while offering my amp at 4 ohms RMS, only 300 rms, please, in this case help, I'm not sure if this gap is connected to the power amp to 2 subs?
and another question, my Kenwood amplifier is 1 ohm or 2 ohm stable and Sony 502Z 2 ohm or 4 ohm stable.
Thanks
Saturday, February 6, 2010
What Amp Need For My 500 Watt Kenwood Speakers Please Help Choosing Me A Subwoofer!!?
3 comments:
"I have a Kenwood 8103D Mono Amplifier ... 1000Watt peak is 2 ohms and 500 watts RMS into 4 ohms, which supplies deliverd and 300 watts RMS."
"Kenwood amplifier to the Sony Xplod 12" sub 800W, which I think is connected, 200 watts RMS into 4 ohms "
So, if the two powers of the sub ... (8 ohms) get 4 ohms. You have 300 watts into 4 ohms, so that 150 of the President, with two speakers. I like to keep my speakers with a minimum of power to 50 watts to 50 watts Overpowered (preferred. .. just the compression real question recognizes that some issues Lound !!!), and I decided on a high speakers in certain applications.
"I have a Sony Xplod amp 502Z ... 125W RMS (250W peak) connected to speaker 250 watt JBL"
The only problem is that the amp does not have "advanced" or "effective" values, having the ability to withstand different ohm variety.
125W for a 250W RMS speaker is an example of a low-power speakers. It will not produce sound quality, because they can not physically moveCone enough. It is better to have from 225 to 300 watts from the speakers.
"Kenwood Amplifier 1 Ohm or 2 Ohm stable"
I'm pretty sure that it does not need an ohm or damage things. The ohm is the amp for you. You take a speaker of 8 ohms, 8 ohms readers. Single-wire and an 8 ohm and 4 ohm amplifier disks. Additional pressures around 8 ohms and 2.66 ohms, but also expanded the force, despite the increase
Sony and 502Z is 2 ohms or 4 ohms stable
Another example ... 4 ohm speakers and press 4 ohms.
- Two 4 ohm speakers, slide the value of 2 ohms
Than with the cable, more power at 2 ohms
Here is what I am today: a "1500w Mono Amplifier made, it is 750W per speaker to the other two configurations. I P3S Rockford Fosgate) 12 years (two of them, because they are using to 400W RMS and 800 peak of 2 ohms.
MTX jack hammer ... God from God, like all subwoofers
you get two Pioneer 12 in one case it led recommended. (SPL subwoofer Version)
Post a Comment